We all want to sleep and hang out comfortably inside our homes, especially during months where the heat is unbearable. It’s scorching, humid, and dry in Asian countries, such as Singapore. And this is where the most essential home appliance comes in, which is the air conditioner. It works by removing the heat inside your house and blow cold air within. As a result, your home feels cool and pleasant. But if you want to maintain your air conditioner working in optimum capacity, you should have it routinely checked by an aircon singapore company.
If you always wondered how your air conditioner works, read on below to know its seven different components. These are vital parts of the A/C system, which uniquely work together to give you that cold air. It’s also crucial to have these components checked out for maximum efficiency of the unit. It’s how you can protect your system and prolong its life.
Blower
The blower is responsible for the air flowing from the supply registers. It works with the furnace to blow cool air into the home. After that, it pulls back the room-temperature air and re-cools it. As a result, you get a steady flow of cool air circulating inside your home.
Evaporator Coil
The evaporator coil is an indoor component of an air conditioner, which is located near the blower. It’s a part of the system that’s responsible for extracting the heat and humidity from the air that’s pulled in by the blower. Thanks to the refrigerant running through the coil, it successfully does its job like magic.
Compressor
The compressor is a part of an air conditioner unit where the gaseous state of the refrigerant passes. The refrigerant turns into gas once it absorbs heat. After it passes through the compressor, the gas is pressurized and heated even more. As a result, it prepares the refrigerant to give up its heat.
Condensing Coil
The condensing coil is the outdoor equivalent of the evaporating coil. So when the refrigerant travels from the compressor to the condenser, it then expels the heat collected from inside to outside. And once the refrigerant is cooled down to its liquid state, it goes back inside to collect more heat in the evaporator coil.
Fan
The fan and fins sync to draw away the heat from the condensing unit to prevent the unit from overheating.
Air Filter
The aircon can function without an air filter, but it’s responsible for collecting the dust and dirt that can possibly damage the unit if it’s not in place.
Thermostat
The thermostat is the control center of the air conditioning process. It reads the room temperature and tells the unit when to turn on or off. You can change it to your preferred settings. The higher the thermostat, the lower your bills will be.
